Enable accessible mode
Enable accessible mode

or

Beta testing firmware

How to make your V5 printer a Beta test unit

  • Ensure that the latest available firmware is installed, and the printer is connected to internet.
  • Start Beta test mode by holding HELP key, then press the CHS key. It is verified by speech feedback:  "Beta channel enabled".
  • Menu/ User service/ Firmware upgrade/ Firmware upgrade from Internet. The latest Beta firmware will now be installed. When completed, the printer will restart. 
    • The UPDATE text lights up when the new Beta firmware is available.
    • During the evaluation process, the Beta firmware will be upgraded on a regular basis following feedback from distributors and internal testing.
    • Do not deliver a Beta test unit to end users before the corresponding firmware is released publically.

How to disable beta test on your printer and set it back to a standard printer

  • Wait until the next publically released firmware is available.
  • Close Beta test mode by holding HELP key, then press the CHS key. It is verified by speech feedback: "Beta channel disabled".
  • Menu/ User service/ Firmware upgrade/ Firmware upgrade from Internet. The latest publically released firmware will now be installed. 
  • Ready!