Disable accessible mode

or

Firmware upgrade Index V5 embosser-X

Firmware upgrade from Internet (wired or WiFi network connection) :

  • press MENU on the control panel of the V5 embosser
  • key down to User service and press OK 
  • key down to Firmware update and press OK
  • select Firmware upgrade from internet by pressing OK
  • latest fimware is now installed,  this process takes 1-10 minutes and are completed with the printer re-starts.  
Firmware upgrade from USB memory:
  • save the latest firmware file (embosser-update-YYYY-MM-DD.zip) to a USB memory stick
  • place the USB memory stick in the USB host port of the embosser
  • press MENU on the control panel
  • key down to User service and press OK
  • key down to Firmware update and press OK
  • key down to Firmware upgrade from USB memory stick and press OK
  • latest fimware is now installed,  this process takes 1-10 minutes and are completed with the printer re-starts. 
It is not possible to downgrade the firmwae with file transfer. The only possibility to dowgrade is be inserting a SD card with an old image and re-booth the V5 printer.