Enable accessible mode
Enable accessible mode

or

Create network port V3

This task requires administration rights and knowledge of the network.

  • Connect your embosser to the network
  • Select start/settings/Printers and Faxes
    • Select File/Server properties, select the Port tab and press Add Port
    • Select Standard TCP/IP Port and New Port to start the add Standard TCP/IP Printer Wizard
      • Follow the Wizard, insert the defined IP address in Printer Name or IP addressport name will be filled in automatically.
      • If the Additional port information required appears, selectGeneric Network Card, press next
      • Finish the Wizard.

The network port is now created.