Setup Wi-Fi network from control panel-X
1. Current Wi-Fi network. Press OK to disconnect or forget the current Wi-Fi network.
If there is no active network, speech feedback: "No Wi-Fi network active".
2. List known Wi-Fi networks. Press OK.
Speech feedback: "Scanning for networks," and known networks available.
Press Arrow up/down to select the network. Press OK to open a new menu: to connect or forget.
3. List Wi-Fi network supporting Wi-Fi protected setup.
Speech feedback: "Scanning for networks", and "found the number of networks supporting WPS", e.g. "Found 3 networks".
Click Arrow up/down to get the list of network names.
Press OK to activate WPS on the embosser.
Click WPS button or router to activate WPS. The Wi-Fi will then be connected.
4. List all Wi-Fi networks. Speech feedback: "Scanning for networks," and list of networks detected by the embosser.
Press Arrow Up/Down to get the list of network names.
Press OK to select the network.
Press Feed to scan network.
For known networks, there are 3 options to choose from: connect, disconnect or forget.
Speech feedback: "Starting wireless protected setup for network name".
For unknown networks or networks that do not support WPS, there is a speech feedback: "Can't connect".