Enable accessible mode
Enable accessible mode

or

Shipping and receiving instructions Basic-D V4-X

Link to packing Basic-D V4

Unpacking the Basic-D V4

Unpack the embosser gently and check the items, save the packing material ans transport lock in case of further transportation of the  unit. 

  • Open the lid and remove the anti moistured bag
  • Remove the transport lock from the back side of the embosser.
  • Store the transport lock in the holders located on the back plate.

Shipping the Basic-D V4

Pack the embosser in the original packing and place the transport lock in position. If the packing material are lost wrap the Basic-D with minimum 5 cm thick absorbing foam and place it in a stable carbord box.