Enable accessible mode
Enable accessible mode


Start PUTTY and the command

This page is under construction

Install PUTTY

Download latest PUTTY program from www.putty.org
Create an "Index Embosser" sessions with following parameters:
- Serial line connected to COMXX (Where XX is the com port the USB-serial converter picked up, see Devices and Printers "Unspecified ATEN USB to Serial Bridge (example COM28).
- Speed (baud) 115200
- Data bits 8
- Stop bits 1
- Parity None
- Flow control None 
Start PUTTY terminal window by "Open"

Now start the command window in Index V4 by the letter "c"

q = quit

s = status in embosser