Start PUTTY and the command -X
This page is under construction
Install PUTTY
Download latest PUTTY program from www.putty.org
Create an "Index Embosser" sessions with following parameters:
- Serial line connected to COMXX (Where XX is the com port the USB-serial converter picked up, see Devices and Printers "Unspecified ATEN USB to Serial Bridge (example COM28).
- Speed (baud) 115200
- Data bits 8
- Stop bits 1
- Parity None
- Flow control None
Start PUTTY terminal window by "Open"
Now start the command window in Index V4 by the letter "c"
q = quit
s = status in embosser