Enable accessible mode
Enable accessible mode

or

How to upgrade firmware on a V5 embosser

With V5 embossers you may upgrade the firmware via internet connection or USB memory.

To upgrade the embosser using internet connection either connect the embosser via a network cable or WiFi connection. 

How to upgrade firmware via internet connection:

  • press MENU on the control panel of the V5 embosser
  • key down to User service and press OK (or right arrow)
  • key down to Firmware update and press OK (or right arrow)
  • select Firmware upgrade from internet by pressing OK
  • the embosser will begin to upgrade the firmware to the latest version. 
    • In the case that the embosser says that there was an error, please try to peform a new update. It is possible for an update to fail due to a network problem. 

How to upgrade firmware via USB memory:
  • save the latest firmware file to a USB memory stick
  • place the USB memory stick in the USB host port of the embosser
  • press MENU on the control panel of the V5 embosser
  • key down to User service and press OK (or right arrow)
  • key down to Firmware update and press OK (or right arrow)
  • key down to Firmware upgrade from USB memory stick and press OK
  • the embosser will begin to upgrade the firmware to the latest version. 
    • In the case that the embosser says that there was an error, please try to peform a new update.