Enable accessible mode
Enable accessible mode


Setup IP with WPS on V5-X

  1. On the embosser control panel press Menu / Communication / Manage Wi-Fi network / Start Wi-Fi Protected Setup / OK.
  2. Press the WPS button on the router you want to have the V5 embosser connected to.
  3. The Wi-Fi network icon flickers when establishing a network connection.
  4. The network icon lights up when the network is connected to the internet. The printer speech feedback: "Connected to Network name, IP number"
  5. HELP+10 give speech feedback of the IP address of the V5 printer.
  6. The Wi-Fi connection via Wi-Fi Protected Setup is now established. If the setup fails, speech feedback: "No known network available".
Link to Printer Port Netwok Setup